Laser marking overview
Each board is taken out of a special cassette and printed with 2DC or text at the designated position using a laser.
This device stores the data again in a dedicated cassette.
▼Typical specifications
Supported work size: 512mm x 612mm (MAX)
Supported plate thickness: 0.8mm to 3.5mm Takt time: 150 seconds/plate
Position accuracy: ±150μm
Repeatability: 45 μm
Data size: Min 0.1 mm, 15 alphanumeric characters printed continuously
Print type: DataMartrix ECC200,QR
Board warpage: When resting on the base plate, both upward and downward warpage are 5 mm
±5mm when suspended
The above specifications are examples and custom-made products are also available.
For more detailed inquiries, please feel free to contact us using the inquiry form.
Key points about laser marking
-
POINT1
High-definition, high-contrast marking
Since the laser light is used to engrave on the material surface without contact, even minute characters can be printed.
The print will not rub off or smudge, and visibility will be maintained for a long time. -
POINT2
Non-contact processing requires no consumables
Since it does not use consumables such as ink or needle tips, running costs can be significantly reduced.
Because it is a non-contact method, there is no need to worry about damaging the target object. -
POINT3
Wide range of support regardless of material
Marking is possible on a variety of materials, including metal, resin, ceramics, glass, and paper.
We can flexibly respond to changes in product specifications and multi-product production. -
POINT4
Ideal for traceability
It can stably imprint serial numbers, QR codes, barcodes, etc., contributing to improved accuracy in parts management and process control.
Application Examples
-
Electronic components and printed circuit boards
Serial numbers and other information can be engraved on printed circuit boards with high precision, improving reading accuracy in subsequent processes.
Non-contact printing enables stable traceability management even for delicate substrates. -
Automotive parts and industrial machinery parts
It can reliably engrave lot numbers and model numbers on metal parts, and is characterized by its durability, which will not fade even after long-term use.
This contributes to enhanced quality assurance and product tracking.
-
Glass and Ceramics
It can reliably engrave lot numbers and model numbers on metal parts, and is characterized by its durability, which will not fade even after long-term use.
This contributes to enhanced quality assurance and product tracking.
About our products
Please feel free to contact us with any questions or concerns.
Please contact us.
